Correcting individual stitches with Edit mode
Correct the imported chart — not redesign the pattern. Use Edit mode when an individual square has imported with the wrong thread, a printed stitch is missing, or a printer mark has become a stray stitch. Check each correction against the original PDF: isolated stitches (confetti) and blank spaces can be deliberate parts of the design.
- Enter Edit mode — open Chart settings with the gear icon, find Edit mode and turn on Correct chart cells. Close settings to return to the chart. Turn the same switch off when you have finished correcting it.
- Select one square — zoom in and tap the individual stitch. The selected square is outlined in red while Set colour is open, so you can check you are correcting the right place. Dragging still moves the chart; an Edit mode tap changes the chart rather than marking a stitch completed.
- Change its thread or colour — choose the correct thread in Set colour. The list starts with this chart's threads; search by code or colour name, or choose a brand to narrow it down. Show all threads opens the full catalogue if the correct thread is missing from the key. Your choice applies to this square only, not every stitch of the original colour, and saves automatically.
- Use closest-match suggestions — the list is ranked by proximity to the square's current colour. Suggestions are a starting point, not proof of the designer's intended thread. Confirm the brand and code against the PDF key before choosing; a blank square has no original thread colour to match.
- Remove a stray stitch — tap the unwanted square, then choose Clear colour to make it blank. This removes the square's full cross stitch; it does not merely hide its colour or mark it unstitched. Edit mode corrects full-cross grid cells, not separate half or fractional stitches, backstitch lines, knots or beads.
- Clean up confetti — compare each isolated stitch with the PDF, then assign the correct thread or clear it only if it is an import error. Cleanup is one square at a time; there is no automatic removal of all confetti. Tap a blank square and choose a thread only when the PDF really prints a full cross there.
Stitch counts and thread totals: changing an occupied square's thread leaves the overall full-cross stitch count unchanged, subtracts one stitch from the old thread and adds one to the chosen thread. Clearing an occupied square reduces the chart's full-cross total by one; filling a blank square increases it by one. Choosing a thread not yet in the key adds a key entry. Thread counts and the completion percentage reflect the corrected chart, so compare them with the PDF's printed totals. A correction is not a record of new stitching and does not mean you have used or bought thread; your physical stash is not rewritten by the edit.
Already-completed stitches: changing a square's thread keeps that square marked completed. Its completed count moves to the chosen thread, without recording a new completed stitch. Clearing the square removes its completed mark too, reducing both the total stitch count and the marked count by one. Editing does not undo physical stitching; if you need to unpick a stitch that still belongs in the chart, use frog mode rather than Clear colour.
Undo or revert: close Set colour without choosing anything to cancel before a change is made. There is currently no Edit mode undo history or one-tap revert to the imported chart. To reverse a colour correction, tap the square again and choose its original thread. To restore a cleared square, choose its original thread in that blank square; if it was completed before clearing, its completed mark is not restored automatically, so turn off Edit mode and mark it completed again. Keep a reader backup before substantial corrections (Chart settings → Export reader backup). Do not delete the reader file to undo edits: deletion also removes its saved stitching progress.